
Courtesy of Nokia. Connecting people! :D
Ram is cheap... Price falls to $50 per peice for 1GB... I cant resist the temptation and grad 2 sticks today and replaced my trust 2 x 512mb
Yes i know... the ram inside the packaging is not kingston.. Its my old old trusty 2 x 256mb ram given by Fujitsu. The 2 x 1GB is now running in my laptop and im typing this message away =p
HomeCamera recently launched their services with free account. What this service does, is to allow you to view your webcam or ip cams via HomeCamera's portal or via your mobile phone.
Now.. whats so good about this service? It allows you to bypass messy ddns set up, portfowarding and such. Whats really really cool is that if you are using D-Link's DCS-2120 ip cam, you can actually set up your ip cam to stream direct to their server and view it from their web portal or via your own mobile anywhere you are around the world.
This is definitely a good service between D-Link and M1 considering that many people gets turn off easily by those hard to configure settings since ISPs in Singapore generally blocks port 80 and etc.. -__-"
Check out my previous entry on DCS-2120 Here
For those that are interested to try out to see how its like, D-Link has a demo cam in operation
username is dlink
password is dlink
Recently HomeCamera sent me the firmware for the DCS-2120 to be used with their service. HomeCamera is the brainchild of Wireless Intellect Labs which is 100% owned and the R&D arm for M1, Singapore's 2nd Largest Mobile Operator
More about DCS-2120 and HomeCamera in the next entry =p
Hurray for the new LCD panel and kudos to Fujitsu's excellent support.
How to enable telnet on DNS-300
Store your current config to XML file by Backup config menu.
Open XML file using notepad, find tag
Do not amend anything else or DNS-300 will not be able to restore config back.
Save the XML file and restore config from XML file by Restore config menu.
After the config has been restored, reboot DNS-300.
After reboot, you can use PuTTY to telnet to your DNS-300.
Use your username and password to login. Otherwise you can use root with the default password 1234
After you have enabled telnet, you can proceed to install ipkg and Ctorrent Here
root@DNS-312H:/proc# cat cpuinfo
Processor : ARM/STORLINK FA52Xid(wb) rev 1 (v4l)
BogoMIPS : 69.83
Features : swp half thumb
CPU implementor : 0x66
CPU architecture: 4
CPU variant : 0x0
CPU part : 0x526
CPU revision : 1
Cache type : write-back
Cache clean : cp15 c7 ops
Cache lockdown : format B
Cache unified : harvard
I size : 8192
I assoc : 2
I line length : 16
I sets : 256
D size : 4096
D assoc : 2
D line length : 16
D sets : 128
Hardware : JunoRevision : 0000
Serial : 0000000000000000
root@DNS-312H:/proc#
Noticed the 2 "LED" on the right side? There is no led under it. The router gives me a very cheapo feeling with a cheapo design. Cant blame much cos i bought it at a cheapo price =p